1.1 SHADOW GAP
3-10mm depending on rib
size. Paint the gap black before application if needed.
1.2 METAL PROFILE
Can match other framing details within your concept.
1.3 TIMBER DETAIL
Can reflect other timber finishes in the scheme to create a panel break or fixing location.
1.4 ALUMINIUM 'C' SECTION
Creates a shadow gap with clean termination for the ribbed material. Can be finished in any colour.
Joins that run perpendicular to the rib direction can be expressed in various ways.
Joins that run parallel to the rib direction are invisible with careful cutting in the trough of adjacent ribs.
Applied direct to walls the acoustic performance of the ribbed materials is Class C or D.
For greater absorption additional backing is required to absorb bass energy.
3.1 ACOUSTIC PERFORMANCE
Can reach up to Class A with the addition of 30mm acoustic backing (Cellofoam 615) behind the ribbed top layer. Any of the junction details can be amended for the increased thickness.
Buxkin Buxkin b.v. Buxkin 2.0 Buxkin UK
Buxkin Acoustic Ribbed Original Wilma Dijkraaf
Jan Veldhoen Samples MilanDesignWeek
DutchDesignWeek Architects Designers Wall Finishes Wool Felt Recycled Leather Wall coverings Buxkin wall Ribbed wall finishes
2.1 INTERNAL CORNERS
Are improved by putting a relief cut in the backing material.
2.2 EXTERNAL CORNERS
Area also improved by the addition of a relief cut in the backing material.
2.3 CORNER PROFILE
Can wrapped in matching leather to create a more robust corner junction.
4.4 END STOP
Can be produced to match the rib size and material choice. These can also be mitred to create framing around doors and other penetrations.
Curves, corners and ends stops all work well with various approaches.
Corners and ends can be detailed as followed.